Logs for Gas Fireplace

Gas Log Buying Guide: What To Know When Shopping For Gas Logs
April 8, 2015 – 12:33 pm

First, Determine your venting option - Vented or Vent Free?

Gas Log Sets are usually divided into two categories: Vented and Vent-Free. Each venting option has its own advantages and disadvantages. Before choosing one, take a look and see how they differ.

Vented
  • More realistic and natural looking flame than vent free
  • Must be installed in a fully functioning wood burning fireplace
  • Majority of heat is lost as it goes up the chimney (heat output is similar to burning wood)
  • Produces soot when flame touches log (some customers find this desirable, others may not)
Vent-Free
  • Produces drastically more heat than vented (heat can potentially damage glass, wood mantels, or electronics around the fireplace)
  • Less realistic flame compared to vented, flame is engineered for a specific pattern
  • Must be installed in a fireplace approved for a vent-free log set
  • Installation is subject to state & local codes (some areas do not allow vent-free)

Match LightThen, Determine the size of your gas logs based off your fireplace measurements

To get the perfect look, you'll want to choose the right size log set which will best fit in your fireplace. Our simple measuring process has been used for well over a decade to help our customers choose the right size! To help you choose, follow these simple steps:

  • Measure the front width (A)
  • Measure the back width (B)
  • Measure the depth from back to front (C)
  • Measure the height of your fireplace (D)

Next, Determine the look you are going for by picking out the “Style”

Remote ControlChoosing that perfect style is matter of preference. If you feel a bit overwhelmed with all the style choices, let us help! We can offer some recommendations based on popularity. Check out some of our most popular styles below to see them in action:

Then, Determine how you want to start and control your gas logs

Match Light (Good)
This is the most basic lighting method. Match Light gas log burners are for natural gas only. There is no pilot, only the logs and burner. You light your fire by placing a match or lighter near the burner and then turning on the gas with your key valve. You can control your flame height by using your key valve which is normally located outside the fireplace either in the wall or floor.

Manual Safety Pilot (Better)
This type of system has a safety pilot that is manually lit and stays lit all the time. Also called a standing pilot, it is similar to a pilot found in a hot water heater. You can turn the burner on and off manually by reaching inside your fireplace and turning the control knob. You cannot operate this type of system with a remote control, however, you can upgrade at a later date.

Remote Control (Best)
This type of system includes a remote pilot valve assembly. Depending on the manufacturer and remote option you select, you will have the ability to control certain functions of the log set from a remote control. Remote controlled options include basic on/off control as well as variable flame height control.

Remote Control Vented Gas Logs
Source: www.gaslogguys.com
You might also like
Ceramic logs for the gas fireplace
Ceramic logs for the gas fireplace
How To Measure Your Fireplace For Gas Logs
How To Measure Your Fireplace For Gas Logs
Fireplace Inserts and Gas Logs - Forshaws of St. Louis, MO
Fireplace Inserts and Gas Logs - Forshaws of St. Louis, MO
How 2 Install 18" Gas Log Set for outdoor fireplaces
How 2 Install 18" Gas Log Set for outdoor fireplaces
Related Posts